SPECIALISED DRONE SERVICES
REMOVING RISK WITH ROBOTICS
Specialised Equipment
Remotely Piloted Aircraft Systems
DJI Matrice M300 RTK
Our inspection and modelling RPAS is one of the most advanced enterprise drones on the market for asset inspections and photogrammetry, featuring a completely new design, with up to 16km transmission distance, dual controller operation, increased wind resistance of up to 15 m/s and full OSDK options for custom payloads and gimbals.
The M300 RTK also features a top mounting gimbal, allowing camera payloads to be fitted on top and access areas normally impossible to capture using a RPAS, such as the underside of bridges or MODUs.
Its precision RTK platform allows cm accuracy and survey grade image acquisition for creating point clouds, 3D models and orthomosaics.
Quantum F90
Our vertical take off and landing RPAS is a survey and mapping giant. The Trinity F90+ combines the convenient handling of a copter with the efficient aerodynamics and endurance of a fixed-wing RPAS. The result is a mapping drone that meets the highest demands on efficiency, safety, delivering survey grade accuracy and versatile application possibilities.
DJI Agras T40
The DJI AGRAS T40 is equipped with the revolutionary Coaxial Twin Rotor design, enabling it to carry a spray load of 40 kg and a spread load of 50 kg (70 L). The aircraft is built in with a Dual Atomized Spraying System, DJI Terra, Active Phased array Radar and Binocular Vision. It supports multiple missions from surveying, mapping, to spraying and spreading, helping you achieve ultimate precision in your agricultural operations.
Elios 3
Our enclosed space inspection RPAS is the Elios 3. Relying on the power of AI and LiDAR mapping, Elios 3 is a versatile indoor RPAS. Reporting is done intuitively on a 3D model of your asset, and situational awareness is built into the piloting app.
Phantom 4 Pro
The workhorse of the fleet. The Phantom 4 Pro is an excellent quadcopter for professional site surveying, 3D imaging of terrain and photogrammetry of structures..
It packs a three-axis stabilized camera with a 1-inch (25 mm) 20 MP CMOS sensor, a mechanical shutter and it has obstacle avoidance with five directional sensors.
Payloads And Sensors
The Zenmuse H20 is a unique all in one solution that defines mission efficiency. Combing a 20 MP Zoom Camera, 23x Hybrid Optical Zoom and 200x Maximum Zoom, 12MP Wide Camera and a 1200m Laser Rangefinder.
Zenmuse H20
The Zenmuse P1 has set a new benchmark for Aerial Surveying and digital twins with the introduction of full-frame sensor to the DJI Matrice 300 System.
This new all in one gimbal solution integrates an interchangeable high-end 45 MP full-frame sensor on a redesigned 3-axis stabilised gimbal. The P1 takes either JPEG, DNG or JPEG + DNG with a resolution of 8192 x 5460 (42MP). With three lenses available, this allows pilots to quickly change the focal length depending on the detail and zoom required.
Zenmuse P1
Zenmuse L1
Instant Clarity. Superior Accuracy. A Lidar + RGB Solution for Aerial Surveying. The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a 20MP camera with a 1-inch CMOS on a 3-axis stabilized gimbal.
The Reach RS2+ is a versatile GNSS receiver that can be used for surveying, mapping, and navigation. It offers centimetre-level accuracy in both RTK and PPK mode, has a battery life of up to 22 hours and is engineered to be tough.
Emlid Reach RS2+
Can-Am
Our Can-Am buggy lets us access remote areas for laying Ground Control Points (GCPs) or picking up drill collars, helping to improve the accuracy of maps and orthos to within milimeters.
Chasing M2 ROV
The Chasing M2 is a professional underwater ROV/Drone designed for industrial applications. M2 allows omni movement in all directions by utilising the eight thrusters, 4k camera system with image stabilisation and has a more powerful mount extension system to meet the needs of multi-professional scenarios.